Knowledge and Experience
Quick Response to your Enquiry
Cost effective solutions
Top Level Consultancy
Installation service if required
Armatherm™ FRR material provides a combination of low thermal conductivity and high compressive strength and has been used in hundreds of structural steel framing connections transferring load in moment and shear conditions. The material is made of a reinforced, thermoset resin which is fire resistant, does not readily burn and has very limited creep under load, making it the ideal material for use in structural and façade thermal break connections.
Armatherm™ 500 is a high strength, polyurethane material made in several densities to support a wide range of loading conditions. Due to its closed cell structure, it does not absorb water or moisture and has limited creep under continuous load. The material is thermoset, does not melt and is flame resistant making it an ideal material for use in structural thermal break connections.
A critical part of any design is to accommodate for mating surface irregularity and differential movement in service. To address this issue bridge bearings, or load pads are required. Ranging from a small rubber pad for a light weight Pre Cast beam, Fabric Laminated Bridge Bearing or ASHTO approved material. Armadillo have a deep understanding of this science and offer a range of proven solutions. View Load Bearing Pads
Planning and design are critical elements in any building project. A badly designed foundation can lead to hugh problems when the facility is put into operation. The time to address both passive, received into the foundation, i.e., measuring machines and aggressive, transmitted from the foundation, i.e. power presses is on the drawing board. Look at just some of the off the shelf solutions Armadillo provides. Please call the engineering department for further help and advice. View Foundation Isolation
If large movements need to be accomodated a sliding element will need to be employed in the design. Armadillo can design manufacture and supply a cost effective solution for applications such as thermal expansion, Petrochemical applications, pipelines or building movement joints. With a standard size range for very fast delivery to bespoke solutions Armadillo can deliver effective low friction solutions to very large problems. View PTFE Bearings
Sports floors, gynasiums and dance studios require a firm yet resilient feel. This is achieved by supporting the floor on resilient pads to givbe the correct balance for shock absorbing coupled with sufficient rebound to give the floor a "live" feel. Armadillo DFP15 is the ideal material to achieve this. View Sprung Isolated Dance Floor Pads
High load capacity cranes exert enormous forces on the rail track and supporting structure. Employed extensively through out the world the LTP Crane Rail Pad effectively reduces the stress transfered tot he structure.
Supplied in length and widths to suit the application the performance of Armadillo LTP Rail Pad is un rivaled. View Armadillo LTP Crane Rail Pad